Friday, January 8, 2010

Xbox 360 Red Ring Of Death Repair Suggestions

When the dreaded red ring of death hits you, your power supply light will be either red, orange or possibly green. For the good operation of your console, you will want it to be green of course. However, if it is orange all is not well with your console. Here are a few Xbox 360 red ring of death tips for when the power supply is set to orange.



An orange light on the power supply of your console is probably going to happen for one of two possible reasons. The console is either turned off or the power supply itself is disconnected from the Xbox. The orange indicator is pretty common because it indicates that the power supply is in a standby condition.



Users become confused because the power supply light can still be set to orange even if the console itself has been turned off. This might be because the power cord is not inserted properly inside the power socket of the system. The real time to be concerned is if the power supply light is orange but the system will not turn on at all.



In this eventuality, an Xbox 360 red ring of death repair is probably your next course of action. There are some simple repair steps you can carry out before things become too drastic without help. The first thing to do is to turn off off your Xbox 360 system and then remove the cable that attaches the power supply to the Xbox itself.



It might sound obvious, but in order to disable the cable connecting the power supply to the machine, you must remove the power cable from the socket on the wall. Secondly, disconnect the power cable from the back of the machine. Once done you can put back all of the power cables and then attempt to start the console again. If your system will still not turn back on, we are looking at some more drastic corrective measures, that are beyond the scope of this short article, but don't give up just yet!



There are some things that you can do though, which might correct the problem quickly. In fact, there are several things that you can do to avoid the potential of for gaming disaster! Firstly, ensure that all of the ventilation openings in the power supply are fully open} to allow air to pass over them. Overheating is a primary cause for faults with the Xbox 360. Additionally, make sure that you do not put the power supply on a bed or sofa or any soft furnishings that might ride up and cover the ventilation openings of the machine. Finally, do not put the power supply in a confined space like a bookcase or shelf, and do not put it close to an alternative heat source such as amplification equipment or a heating device. or even near direct sunlight, like a window.



The red ring of death is not the end of your Xbox 360 playing days, because it is possible to fix your Xbox in a couple of hours, with a tiny bit of help.

No comments:

Post a Comment